ABV Blending Calculator. Plan an ideal two-component target-ABV blend from a fixed total, component A, or component B volume while retaining source and reference-basis evidence.
Specialist tool for Wine Spirits1 documented formula3 recommended next stepsPrivate in your browser
Use this result well
A quick decision brief for this specific tool
Inputs that matter
One de-identified two-component target-blend plan; plan scope, record type, source record ID, both component identities and strength sources, one shared OIML20°C, TTB60°F or exact source-defined reference basis and condition record, planning time, reviewer/review time and retention record; component A, component B and target strength in ABV percent or U.S. proof; fixed ideal-additive-total, fixed-A or fixed-B sizing mode with positive mL, L or U.S. fl oz anchor; exactly-two-component, same-basis, additive-volume, no-unrecorded-alcohol-change, same-preparation-comparison and nondecision boundaries; plus optional all-or-none independent prepared A/B volumes, units, actual method, source and same-component/reference match record
Output to expect
Normalized A, B and target ABV; ideal A and B fractions and percentage shares; planned A and B quantities plus ideal additive total in normalized millilitres; source ethanol-volume equivalent, weighted arithmetic check and A:B ratio; and optional independently prepared nominal ABV plus signed target and A-share percentage-point differences without pass/fail
How it works
Normalize proof to ABV and mL/L/U.S.fl oz to millilitres; require two distinct source strengths with the target strictly between them on one recorded basis; calculate A fraction = (target − B) ÷ (A − B), set B to the remainder and scale from the selected total/A/B anchor; recompute the weighted ideal ABV; require all independent preparation fields before a same-component/reference arithmetic comparison; preserve six nondecisions and versioned Project outputs
Confirm the exact source record, both component identities, strength values and methods, shared reference temperature/basis, target, sizing mode and plan revision. Another source lot, strength, component, temperature basis, target or sizing anchor needs another plan.
Use the two-component relation only when the target is strictly between the source strengths and all three strengths share one basis. More than two components, equal-strength sources, different definitions or an outside target require another accountable method.
Treat A+B as ideal additive input volume only. It does not predict physical final volume, ethanol-water contraction, temperature expansion, dissolved-solids effects, evaporation, spillage, transfer loss, retained residue, additional ingredients or uncertainty.
If comparing prepared volumes, confirm the same two components, strengths, reference basis and preparation. A small or zero signed difference is arithmetic/transcription evidence only—not measurement, instrument, proof, formula, label, tax, quality, release or compliance acceptance.
Use the result only as a reviewed ideal blend plan. It does not set legal proof, approve a formula or label, authorize production or service, calculate BAC or impairment, define safe consumption, or decide driving, medication, pregnancy or health actions.
Choose your path
Built around the job you need to finish
Create one source-owned ideal two-component target-ABV blend plan from an explicit total, component-A or component-B sizing anchor, optionally reconcile one independently prepared pair, and refuse every physical-volume, legal-proof, label, tax, release, service, BAC, health and consumption decision.
Beverage formulation technician retaining one reviewed plan
Preserve both source identities, strength evidence and one reference basis while converting a target into actionable ideal A/B quantities.
Identify the source record, choose one sizing anchor, enter both source strengths and a target strictly between them, calculate, review the boundaries and retain a snapshot.
Can hand off reproducible ideal quantities without presenting additive volume as physical final volume or the arithmetic as formula, proof, label, tax or release approval.
Quality reviewer reconciling a prepared two-source record
Compare actual recorded A/B preparation quantities with the reviewed plan without turning numerical closeness into measurement or compliance acceptance.
Freeze the same two components and reference basis, enter the complete independent method/source/match tuple, then inspect nominal ABV and signed target/share differences.
Gets transparent arithmetic reconciliation while component identity, strength, instrument status, uncertainty, legal proof, quality and disposition remain external.
Demonstrate two-source fraction math, ABV/proof and volume-unit normalization, plus why more sources and consumption decisions require other methods.
Load the static training plan, exercise all three sizing modes and unit families, trigger target/equal-source/partial-evidence errors, inspect stale/reset states and review every nondecision.
Learners can reproduce the calculation and explain why physical volume, proofing, service, BAC and health conclusions need separate accountable evidence.
Authoritative checks for this tool
Outputs and checklists are planning aids. Review the linked current authorities and the records, terms, instructions, and requirements that apply to your exact situation before a consequential decision.
Convert proof when selected, but preserve each source and the declared OIML20°C, TTB60°F, or exact source-defined same-condition basis. The Tool does not validate either strength.
U.S. proof = 2 × ABV%
Solve the bounded two-component fraction
The sources must have distinct strengths and the target must be strictly between them. The selected total/A/B anchor then scales both ideal input quantities.
A fraction = (target − B) ÷ (A − B); B fraction = 1 − A
Check arithmetic without issuing acceptance
The weighted check repeats the plan arithmetic. An optional prepared-volume comparison reports signed differences only; it never validates measurement, proof, formula, quality, or release.
Ideal ABV check = (A volume × A ABV + B volume × B ABV) ÷ (A volume + B volume)
Updated: September 2026
Example Scenarios
For source A at40% ABV, source B at15% ABV, a25% target and a5 L additive-total anchor, the plan allocates2 L A and3 L B before any physical-volume or compliance review.
A reviewer can fix the accountable volume of component A or B and calculate the corresponding ideal quantity of the other component without relabeling the anchor as available inventory.
Enter both independently prepared volumes, units, actual method, source and same-reference match record to see nominal ABV and signed target/share differences—never a pass/fail result.
Common Mistakes to Avoid
✕
Treating two entered source volumes as interchangeable inventory limits
✓
Choose one explicit sizing mode. The entered volume fixes the ideal total, A quantity, or B quantity; it does not imply both source quantities are available or approved for use.
✕
Calling the ideal weighted target a measured or legal final ABV
✓
Retain source and reference evidence, measure and proof under the accountable procedure when required, and keep labels, tax, release, service, BAC and health decisions external.
FAQ
Only when there are exactly two identified sources with distinct strengths, the target lies strictly between them, and both source strengths and the target use one recorded concentration and reference basis.
No. It is the sum of ideal input volumes. Ethanol-water contraction, temperature, dissolved solids, ingredient interactions, losses, retained residue and measurement uncertainty remain outside the calculation.
No. It intentionally refuses multi-component formulation. Use an accountable formulation method that owns every component, constraint, source and review instead of chaining two-source results invisibly.
No. The Tool only divides entered U.S. proof by two for ideal arithmetic. Regulated proof can require accountable readings, temperature correction, prescribed tables, approved devices and jurisdiction-specific records.
It reports nominal weighted ABV plus signed differences from the target and planned A share. It does not prove component identity, strength, instrument calibration, compliance, quality, release, service safety or health suitability.
About ABV Blending Calculator
Create one reviewed, de-identified two-component blend plan. Record both source identities and strength sources, keep one shared reference basis, choose a sizing anchor, and optionally compare independently prepared A/B volumes. Results are ideal additive arithmetic—not measured final volume, regulated proof, label, tax, release, service, BAC, health, or consumption guidance.
