Reconcile separate privacy-fence infill faces, exact straight cuts or a reviewed item schedule, sourced rails, matching stock, sale packs and incomplete quotes.
A quick decision brief for this specific tool
Layout or material schedule source, Material quantity basis, Quote currency code, Infill product and cutting source, and 42 more
Fence material faces, cuts and purchase record
1 documented formula across 1 calculation mode
Choose your path
Turn separate measured privacy-infill faces or a reviewed whole-item schedule into complete straight cuts, explicit rail requirements and exact product purchases without inventing posts, gates, privacy performance or installation rules.
Keep physically separate faces, openings and product changes from sharing impossible cuts or remainders.
Enter every net rectangular face group separately, including copies only when dimensions and product are identical.
Gets per-face board positions and a written final-board record without automatically adding posts, gates or opening deductions.
Use the exact orientation, profile, stock length, trim, kerf and independently reviewed rail schedule.
Use straight-infill geometry only when it matches the selected system; route overlap, profile, diagonal, stepped, racked or prefab designs to the reviewed whole-item schedule.
Can audit complete cuts and stock allocation without a fabricated universal overlap, rail, support, footing or fastener rule.
Account for matching stock, explicit spares, supplier packs and partial quote coverage.
Enter exact infill, rail or schedule SKUs and sources, then download only the current valid record.
Sees known and unknown purchase lines separately and never reads a blank quote as free.
Outputs and checklists are planning aids. Review the linked current authorities and the records, terms, instructions, and requirements that apply to your exact situation before a consequential decision.
Tools you might need next
Build a fence material record from actual board dimensions, separate infill faces and reviewed rail or item schedules. Reconcile complete cuts, usable stock, sale packs and optional quotes.
Count fence posts from separate straight runs, reviewed maximum spacing and shared endpoint IDs. Reconcile gates, exact post SKUs, usable stock and whole sale packs.
Build and compare source-owned fence cost scenarios. Reconcile written amounts, unit rates, bundled items and unknown fees before comparing equivalent scopes.
Do not pool separate corners or openings. Copies are valid only for identical faces using the same exact infill product. Posts and gates are not inferred.
Each physical face is rounded independently from its net width or height, exact board face, fixed internal gap and explicit edge clearancesA cut longer than usable stock is rejected. The record exposes the final trimmed face and unallocated length; it does not invent splices or reuse offcuts across incompatible products.
Usable stock = source length − total end trim; complete pieces account for entered crosscut kerfEnter rails only from the reviewed system. Use the whole-item schedule for overlaps, profiled or tongue-and-groove boards, diagonal/stepped/racked layouts, prefab panels, gates, posts, hardware or other exact components.
Required units + explicit spares − matching stock → whole supplier packsUpdated: August 2026
Enter the left and right infill faces separately after the reviewed gate opening is removed. Their final boards and stock cuts are rounded independently; gate and terminal hardware stay outside the geometry record.
Switch orientation only when the selected source supports it. The tool counts positions over face height and cuts across face width; it does not choose supports or expansion clearances.
Do not force it into straight full-width geometry. Enter the reviewed whole-item bill with exact SKUs, stock, packs and quote coverage.
Build a source-owned privacy-fence material record. Split net faces at gates, corners, height, pattern and product changes; use straight-infill geometry only when it matches the selected system, otherwise enter the reviewed whole-item schedule.