Reviewed Nutrient Stock-Dilution Record Reconciliation
Reproduce one source-owned analyte stock-dose record from explicit mg/L concentrations and final volume, then compare completed and independent doses.
Built for Hydroponics1 documented formula3 recommended next stepsPrivate in your browser
Use this result well
A quick decision brief for this specific tool
Inputs that matter
One de-identified reviewed production, manufacturer-program or training dilution record; responsible recipe/revision/date and exact crop/batch/system/stage applicability; analyte/species/quantity basis and target authority; stock product/lot/label/SDS, assay/conversion and completed preparation; source-water analysis; final-volume make-up definition; measuring/calibration/precision, whole-recipe cross-contribution, compatibility/safety, preparation/approval, monitoring and physical-state/displacement records; target, water and absolute stock concentrations in mg/L; final solution volume; completed responsible dose source/value; and an optional independent same-basis dose source/value
Output to expect
Required analyte increment; final-volume mass-balance stock dose; completed record's signed, absolute and descriptive relative dose difference; final concentration reproduced by the completed dose and its signed target difference; and optional independent dose reconciliation
How it works
Validate all provenance and bounded values; require source-water concentration at or below target and absolute stock concentration above target; solve the two-solution final-volume mass balance `(target − water) × final volume × 1000 ÷ (stock − water)`; reject any recorded dose above final volume; reproduce the completed dose's final analyte concentration; then compare complete responsible and optional independent records without clamping signed differences
Confirm that analyte/species, elemental or compound basis, assay conversion, target, water sample, absolute stock concentration, final-volume convention, product/lot, recipe revision, batch and precision all match. A different product, water sample, crop stage, recipe revision or quantity basis needs another responsible calculation and run.
Use the result only for same-record mass-balance and transcription QA. It does not choose or validate a crop, cultivar, system, target, product, fertilizer grade, assay, water source, whole-recipe balance, stock preparation, solubility, compatibility, tank separation, mixing sequence, injector, EC/TDS, pH, monitoring, application, disposal, food safety, label/SDS requirement or chemical-safety decision and authorizes no preparation or dosing action.
Choose your path
Built around the job you need to finish
Independently reproduce one completed source-owned final-volume stock-dilution calculation for one exact analyte in mg/L, then reconcile the responsible and optional independent dose records without inventing a crop target, recipe, product, mixing instruction or safety decision.
Grower checking a completed production dilution record
Catch a transcription, water-background or starting-volume mistake before treating a responsible recipe record as internally consistent.
Preserve the exact batch, analyte, target authority, water analysis, stock assay/preparation and final-volume convention, then compare the source-recorded dose with mass-balance arithmetic.
Sees signed dose and final-concentration differences while recipe, preparation, application and crop decisions remain with the responsible production process.
Quality reviewer reconciling product and water evidence
Keep product lot/label/SDS, assay conversion, water sample and measuring precision attached to the same calculation revision.
Record the exact analyte/species basis, cross-nutrient balance owner, compatibility record and completed dose, then add an independent same-basis dose only when every input matches.
Gets a reproducible arithmetic comparison without a bare ppm interpretation, hidden oxide conversion or false multi-product approval.
Supervised learner studying dilution mass balance
Understand why final solution volume, source-water background and absolute stock concentration cannot be replaced by three generic N/P/K ppm fields.
Use the de-identified training example, inspect the four calculation steps and trace which decisions stay in the recipe, label/SDS and responsible review.
Can reproduce the 280 mL example and explain why exact arithmetic does not authorize mixing, dosing or crop use.
Authoritative checks for this tool
Outputs and checklists are planning aids. Review the linked current authorities and the records, terms, instructions, and requirements that apply to your exact situation before a consequential decision.
Record whether the responsible source means an element, ion or compound and how any fertilizer-grade oxide, assay, density or preparation value was converted. This worksheet uses only the already documented absolute stock, source-water and target mass concentrations; it does not interpret bare ppm, EC/TDS, fertilizer grade or a multi-element label.
One analyte/species + one mg/L basis + one recipe revision + one final batch
Use Final-Volume Mass Balance
The final volume is the solution volume after stock addition and make-up. Source water occupies final volume minus stock volume, so both streams' analyte mass is retained. This is not an instruction to add stock to the entered number of liters of starting water.
Dose mL = (target − water) × final L × 1000 ÷ (stock − water)
Reconcile, Do Not Prescribe
Report signed, absolute and descriptive relative differences for the completed responsible dose and optional independent dose. Agreement checks only arithmetic and transcription; the current recipe, product label/SDS, whole-solution balance, compatibility, preparation, application and post-mix verification remain responsible external records.
A reviewed source records a 150 mg/L elemental-N target, 10 mg/L source-water background, 10,010 mg/L absolute stock and final 20 L batch. The worksheet reproduces 280 mL and compares it with the completed record without choosing the target or authorizing preparation.
Preserve the exact product, lot, label/SDS revision, assay conversion, stock preparation and final-volume convention. Use one product-defined analyte calculation only after the responsible whole-recipe record has accounted for every other nutrient supplied by that product.
A second reviewer uses the identical analyte, target, water analysis, stock concentration, final volume and precision. Compare signed dose differences without treating exact agreement as confirmation of agronomy, chemistry, equipment, monitoring or safety.
FAQ
A bare ppm label does not identify the quantity, species or conversion scale. This record requires one source-defined analyte mass concentration in mg/L and retains any element/oxide, assay, density or preparation conversion in the responsible source rather than guessing it.
Real products can supply several nutrients, fertilizer grades may use phosphate/potash rather than elemental P/K, and multiple products can contribute the same analyte. The responsible whole-recipe calculation must solve that coupled balance before this one-analyte record is checked.
The make-up water can already contain the analyte. The final-volume mass balance includes that measured background and the stock contribution. If water background exceeds the target, this addition-only worksheet stops because removal, alternate water or dilution requires a different responsible plan.
No. It means the completed solution is made up to a final volume of 20 L after stock addition, according to the responsible preparation record. Adding the stock to 20 L of starting water changes the final volume and concentration.
Only that the entered concentrations, final volume and recorded dose agree arithmetically at the displayed precision. It does not validate the target, label, assay, water sample, recipe completeness, compatibility, mixing order, equipment, EC/pH, crop response, application, disposal or safety.
About Reviewed Nutrient Stock-Dilution Record Reconciliation
Reproduce one reviewed, de-identified final-volume stock-dilution record for one exact analyte in mg/L. Preserve the responsible recipe, batch applicability, analyte basis, target owner, exact stock product/lot/label/assay, source-water analysis, final-volume convention, measuring precision, whole-recipe cross-contributions, compatibility/SDS and monitoring ownership. Compare the arithmetic dose with a completed responsible record and optional independent record without choosing a crop, target, fertilizer, recipe, mixing process or safety decision.
