Filament Usage Calculator
Estimate 3D printing filament usage in grams and meters from model volume and infill. Plan material costs and spool requirements for FDM print jobs.
Specialist tool for 3D Printing1 documented formula1 real workflowPrivate in your browser
Use this result well
A quick decision brief for this specific tool
Inputs that matter
Print Volume, Filament Diameter, Material Density
Output to expect
Filament Usage Calculator
How it works
1 documented formula across 1 calculation mode
- Keep 3 bounded inputs within the limits shown beside the fields.
- Confirm that every value uses the unit and time basis shown before comparing scenarios.
- Change one input at a time to see which assumption materially changes the result.
Was this tool helpful?
Related Tools
Tools you might need next
Filament Usage (Grams) Calculator
Calculate filament weight from extrusion length and diameter. Free filament usage (grams) calculator for FDM 3D printing, slicer settings, and print planning.
3D Printing Time
Usage Rate Calculator
Estimate player usage rate from individual and team stats. Free online basketball calculator with instant, accurate results.
Basketball
Digital Print Ink Usage
Estimate digital textile printing ink consumption from print area and coverage. Free digital print ink usage tool for digital, print, and more.
Dyeing
Reference & details
How it works
Updated July 2026
How it works
Updated July 2026Solid Volume to Filament Weight
Multiply printed volume (cm³) by material density to get weight. PLA density ~1.24 g/cm³; PETG ~1.27; ABS ~1.04; TPU ~1.21.
Weight (g) = volume (cm³) × density (g/cm³)Infill and Shell Volume Breakdown
Total volume = solid shell volume (walls, top/bottom layers) plus infill volume. Infill percentage applies only to internal sparse regions, not walls.
Infill volume = internal cavity volume × (infill% / 100)Filament Length from Weight
Convert weight to length using cross-section area of filament (1.75 mm or 2.85 mm diameter).
Length (m) = weight (g) / (density × π × (d/2)² × 1000)Updated: July 2026
Example Scenarios
Shell ~30 cm³ + infill ~15 cm³ = 45 cm³ × 1.24 g/cm³ ≈ 56 g PLA ≈ 18.5 m on 1.75 mm filament.
Solid 12 cm³ bracket × 1.27 g/cm³ = 15.2 g PETG. High-stress parts warrant full infill — calculator uses entire bounding volume minus designed voids.
Six parts totaling 420 g PLA. A 1 kg spool with 680 g remaining is sufficient with ~260 g margin for brim, purge, and failed first layers.
Common Mistakes to Avoid
Common Mistakes to Avoid
Applying infill percentage to the entire model volume
Infill applies only to internal regions. Perimeters, top layers, and bottom layers are solid regardless of infill setting — underestimating shell volume undercounts filament.
Using STL bounding box volume instead of actual mesh volume
Bounding box overestimates heavily for irregular shapes. Use actual mesh volume from CAD or slicer preview for meaningful estimates.
FAQ
Slicer estimates are authoritative — within 2–5% when you enter the same infill, walls, and support settings. This calculator approximates before slicing for quick planning.
Pattern (grid, gyroid, honeycomb) changes usage slightly at the same percentage. Gyroid is efficient; cubic and concentric may use 5–10% more at identical infill settings.
Add 5–15% for supports depending on model. Brim and skirt add negligible weight. Failed prints and purge tower waste on multi-material jobs need separate allowance.
1 g of PLA 1.75 mm ≈ 0.33 m. Formula: length = weight / (density × cross-section area). A 1 kg spool of PLA 1.75 mm is roughly 330 meters.
Slicers include walls, top/bottom solid layers, infill, supports, and brim. A hollow-looking STL still prints with solid perimeters and partial infill.
About Filament Usage Calculator
Knowing filament usage before printing helps with cost estimation and spool planning. This calculator estimates grams and meters of filament from model volume, infill percentage, wall count, and material density.