Tools you might need next
Calculate rock or mineral density from mass and volume. Free online calculator with instant results — no signup required.
Identify approximate Mohs hardness from scratch test results against reference minerals. Free mineral hardness identifier tool for mineral, hardness, and more.
Convert true dip to apparent dip measured on a section at a given angle to strike. Free strike dip converter for strike, dip, and more.
This tool applies a standard formula from the relevant domain. The computation is deterministic — given the same inputs, the result is always identical. The formula accounts for the primary variables that determine the output.
UCS ≈ 10^(0.065 × R + 1.01) MPaUpdated: July 2026
A typical use case demonstrating the calculator with representative values.
→ Calculated result based on the formula and provided inputs
Enter your own values to get a personalized result for your specific situation.
→ Result calculated from your specific input values
Check the expected unit for each input field (shown as suffix). Converting between imperial and metric units before entering values prevents calculation errors.
This calculator uses the formula shown. Real-world results may vary due to factors not captured by the model. Use the result as an estimate and verify with domain-specific standards.
Estimate uniaxial compressive strength from Schmidt hammer rebound number. Free schmidt hammer ucs tool for schmidt, hammer, and more. It applies the calculation formula (UCS ≈ 10^(0.065 × R + 1.01) MPa). For example: rebound 45 (strong limestone) — A typical use case demonstrating the calculator with representative values.