Whole House Generator Setup

Workflow

1. 1

   Plan and Assess

   30 minutes

   Gather measurements and code requirements for whole house generator setup.

   Generator SizingWire Gauge by Amperage

   Show tips (2)
2. 2

   Calculate Sizing

   45 minutes

   Run calculators to size components for whole house generator setup.

   Generator SizingTransfer Switch Rating

   Show tips (2)
3. 3

   Install and Wire

   2-4 hours

   Execute installation following calculated specifications.

   Generator SizingTransfer Switch RatingPanel Load Calculator

   Show tips (2)
4. 4

   Test and Inspect

   1 hour

   Verify operation, schedule inspection, and document as-built.

   Transfer Switch RatingSub-Panel Wire Size

   Show tips (2)

Tools Used

• Generator Sizing
  Primary

  Core sizing calculation for whole house generator setup.

• Transfer Switch Rating
  Primary

  Secondary validation metric.

• Panel Load Calculator
  Supporting

  Supporting calculation during install.

• Sub-Panel Wire Size
  Reference

  Reference check during testing.

Reference Materials

• Gradual Progression

  Start with basic techniques and standard practices. Increase complexity only as your skills and confidence develop.

• Reference Photos

  Take photos at each stage to track progress and troubleshoot if results differ from expectations.

• Reclaim Materials

  Save and reclaim offcuts and scraps — many can be reused in smaller projects.

Related Scenarios

• Electrical Panel Upgrade Guide
  Electrical WorkAdvanced4 tools
• Ev Charger Installation Guide
  Electrical WorkIntermediate4 tools
• Emergency Plumbing Shutoff Guide
  PlumbingBeginner4 tools