Document Original Panel
30 minutesdocument original panel with precision, following established stained glass methods and verifying results at each stage.
Field context
This workflow is part of 1 niche field
Learn restoration repair from scratch with a clear step-by-step workflow, recommended tools, safety guidelines, and expert tips.
document original panel with precision, following established stained glass methods and verifying results at each stage.
remove damaged sections with precision, following established stained glass methods and verifying results at each stage.
match replacement glass with precision, following established stained glass methods and verifying results at each stage.
re-lead and solder with precision, following established stained glass methods and verifying results at each stage.
clean and protect with precision, following established stained glass methods and verifying results at each stage.
Interactive 4-phase technical roadmap from prep measurements to final inspection.
Accurately gauge working surface dimensions, inspect sub-layer conditions, and establish reference benchmark baselines.
Adjust project scale to dynamically estimate required materials & budget for Restoration Repair Guide.
Covers 165 sq ft required materials.
Estimated essential tools & safety gear.
Baseline DIY execution cost estimate.
Key benchmarks for restoration repair.
| Method | Line Width | Best For |
|---|---|---|
| Copper foil | 1/8 in | Suncatchers |
| Lead came | H or U | Panels |
| Paint | N/A | Detail |
One confident score line beats multiple light passes — glass follows the first cut.
Photograph and trace damaged pieces before removal — color and texture matching is the hardest restoration step.
Old panels may contain lead paint and came — wear a respirator when disturbing aged putty.
Crucial code requirements, material risk alerts, and prevention checklists for Restoration Repair Guide.
⚠️ Risk Warning: Purchasing net calculated material causes project delays when cuts or breakage occur.
💡 Prevention Action: Always add a 10%-15% buffer allowance to initial calculated quantities.
⚠️ Risk Warning: Applying finishes to dusty or uneven surfaces reduces adhesion by up to 60%.
💡 Prevention Action: Vacuum, prime, and check levelness (max 1/8" gap over 10 ft) before starting.