Tools you might need next
Calculate number of drip emitters needed for a field area. Free drip irrigation calculator for drip, irrigation, and more.
Calculate sprinkler precipitation rate from flow and spacing. Free sprinkler precipitation rate tool for sprinkler, precipitation, and more.
Calculate irrigation interval from allowable depletion and ET rate. Free irrigation schedule calculator for irrigation, schedule, and more.
This tool applies a standard formula from the relevant domain. The computation is deterministic — given the same inputs, the result is always identical. The formula accounts for the primary variables that determine the output.
HP = Q × TDH / (3960 × Efficiency)The calculation requires: Flow Rate, Total Dynamic Head, Pump Efficiency. Each parameter contributes to the final result according to the formula above. Accuracy depends on the precision of your input measurements.
Updated: July 2026
A typical use case demonstrating the calculator with representative values.
→ Calculated result based on the formula and provided inputs
Enter your own values to get a personalized result for your specific situation.
→ Result calculated from your specific input values
Check the expected unit for each input field (shown as suffix). Converting between imperial and metric units before entering values prevents calculation errors.
Ensure denominator values (divisors) are non-zero. The calculator validates this, but understanding which fields cannot be zero helps interpret results correctly.
Calculate pump brake horsepower from flow rate and total dynamic head. Free pump horsepower calculator for pump, horsepower, and more. It applies the calculation formula (HP = Q × TDH / (3960 × Efficiency)). For example: 200 gpm, 80 ft tdh, 75% eff — A typical use case demonstrating the calculator with representative values.