Tools you might need next
Size water supply pipes by fixture units and flow rate. Calculate copper and PEX pipe diameter for residential plumbing per IPC fixture unit tables.
Calculate water pressure loss in pipes from flow, length, and diameter. Estimate PSI drop for residential plumbing and irrigation system design.
Calculate drain pipe slope per IPC code. Enter pipe diameter and run length to get minimum and recommended fall in inches per foot for waste lines.
This tool applies a standard formula from the relevant domain. The computation is deterministic — given the same inputs, the result is always identical. The formula accounts for the primary variables that determine the output.
Hazen-Williams: h_f = 10.67 × L × Q^1.852 / (C^1.852 × D^4.8704)The calculation requires: Pipe Length, Internal Diameter, Flow Rate, Hazen-Williams C. Each parameter contributes to the final result according to the formula above. Accuracy depends on the precision of your input measurements.
Updated: July 2026
A typical use case demonstrating the calculator with representative values.
→ Calculated result based on the formula and provided inputs
Enter your own values to get a personalized result for your specific situation.
→ Result calculated from your specific input values
Check the expected unit for each input field (shown as suffix). Converting between imperial and metric units before entering values prevents calculation errors.
Ensure denominator values (divisors) are non-zero. The calculator validates this, but understanding which fields cannot be zero helps interpret results correctly.
Calculate friction head loss in pipe using Hazen-Williams formula. Free online plumbing calculator with instant, accurate results. It applies the calculation formula (Hazen-Williams: h_f = 10.67 × L × Q^1.852 / (C^1.852 × D^4.8704)). For example: 150 ft, 1 in pipe, 10 gpm, c=130 — A typical use case demonstrating the calculator with representative values.