Tools you might need next
Calculate engine displacement from bore, stroke, and cylinder count. Convert cubic inches to liters and compare stroker or overbore combinations.
Calculate audio compressor output levels from threshold, ratio, and input level. Visualize gain reduction for mixing and mastering.
Calculate final drive ratio, engine RPM at speed, and optimal gear spacing. Plan transmission ratios for highway cruising and acceleration goals.
This tool applies a standard formula from the relevant domain. The computation is deterministic — given the same inputs, the result is always identical. The formula accounts for the primary variables that determine the output.
Injector cc/min = (HP × BSFC × 10.5) ÷ (Cylinders × Duty Cycle)The calculation requires: Target Horsepower, Cylinders, BSFC, Max Duty Cycle. Each parameter contributes to the final result according to the formula above. Accuracy depends on the precision of your input measurements.
Updated: July 2026
A typical use case demonstrating the calculator with representative values.
→ Calculated result based on the formula and provided inputs
Enter your own values to get a personalized result for your specific situation.
→ Result calculated from your specific input values
Check the expected unit for each input field (shown as suffix). Converting between imperial and metric units before entering values prevents calculation errors.
Ensure denominator values (divisors) are non-zero. The calculator validates this, but understanding which fields cannot be zero helps interpret results correctly.
Calculate required fuel injector flow rate from horsepower, duty cycle, and fuel type. Free fuel injector sizing calculator for EFI tuning and engine builds. It applies the calculation formula (Injector cc/min = (HP × BSFC × 10.5) ÷ (Cylinders × Duty Cycle)). For example: 400 hp 4-cylinder, 80% duty cycle — A typical use case demonstrating the calculator with representative values.